1. Test overview.

This test is a auto-test of the 135 film carrier. I.e. It only checks of correct operation. No parameter is saved and the operator action is not necessary.
In fact, it is not a test in itself, it does nothing but connect all the unit tests which are listed below, namely :

• 135 Check Firmware
  
• 135 Command LEDS
  
• 135 Encoder 1
  
• 135 Motor Intensity Pro
  
• 135 Flares
  

The launch of this test allows to know if the 135 Film carrier is functional, but it will not show if it is correclty adjusted.

2. Test conditions.

This test relates to the 135 Film carrier inserted in the scanner.
The 135 Film carrier must be inserted in the scanner to carry out this test.
No film must be inserted in the film carrier for this test.
The acceptance of the test is automatic.
No parameter is saved.

3. Pre-requirements.

None.

4. Test realisation.

Click on RUN to execute the test. The unit tests listed below will be carried out the ones after the others.
Results of each unit tests will appear on the execution wincow.

5. Test acceptance.

Whatever the results of the unit tests, they will all be carried out. I.e. meaning that at the end of the auto-test, certain tests will be accepted, others rejected.
If all the unit tests are accepted, the auto-test will be accepted. If at least one unit test is rejected the auto-test will be rejected.
For the acceptance of each unit test, Please see corresponding assistance.

6. Other affected tests.

See corresponding help for each test.

7. Trouble shooting.

If one of the unit tests fails : See assistance of the corresponding test.